To Shut Down The Analyzer - Agilent Technologies PNA Series Installation And Quick Start Manual

To Shut Down the Analyzer

IMPORTANT Only shut down the analyzer when preparing to service it, or provide security
via password protection.
To shut down the analyzer, click
The On/Off switch color changes from green to yellow when the analyzer has finished
switching to shut down mode.
When turned on, the analyzer application powers-up in the preset settings after
performing a full system boot-up and requesting a password.
CAUTION Only in an emergency, should the power cord be removed from the analyzer
without first turning off the analyzer. Removing the power cord without the
analyzer in hibernation or shut down mode is likely to damage the analyzer's
hard drive.
Chapter 1
, . In the dialog box, select
Start Shutdown
Installing Your Analyzer
STEP 9. Turn Off the Analyzer
.
Shut Down
1-11