Instrument Markings - Agilent Technologies PNA Series Installation And Quick Start Manual

Safety and Regulatory Information
Regulatory Information

Instrument Markings

The instruction documentation symbol. The product is marked with this
symbol when it is necessary for the user to refer to the instructions in the
documentation.
The CE mark is a registered trademark of the European Community.
(If accompanied by a year, it is when the design was proven.)
The CSA mark is a registered trademark of the Canadian Standards
Association.
This ISM device complies with Canadian ICES-001.
ICES/NMB-001
Cet appareil ISM est conforme a la norme NMB-001 du Canada.
This is a symbol of an Industrial Scientific and Medical Group 1
Class A product.
This is a required mark signifying compliance with an EMC requirement.
The C-Tick mark is a registered trademark of the Australian Spectrum
Management Agency.
The ON, OFF, and STANDBY symbols are used to mark the positions of the instrument
power line switch. The AC symbol is used to indicate the required nature of the line
module input power.
ON symbol
STANDBY symbol
OFF symbol
3-4
ON symbol
OFF symbol
AC (alternating current) symbol