Specific Front Wiper Position (Service Position) - Renault CLIO 2019 Vehicle User Manual

winDscrEEn wash, wiPE
specific front wiper position
(service position)
This position enables the blades to be
lifted to remove them from the winds-
creen.
It may be useful to:
– to clean the blades;
– to release the blades from the winds-
creen in winter;
– replace the blades ➥ 5.33.
With the ignition on or the engine run-
ning, lift the 1 stalk twice to position A
(single sweep). The blades stop slightly
away from the bonnet.
To return the blades to low position,
with the ignition on, ensure that the
wipers have folded down onto the wind-
screen, then move the stalk 1 to posi-
tion A (single sweep).
Before switching on the ignition,
place the wipers on the windscreen.
Otherwise, there may a risk of damage
to the bonnet or the wipers when they
are switched on.
1.108
(4/5)
g
Before carrying out any
action involving the wind-
screen (washing the vehi-
cle, de-icing, cleaning the
windscreen etc.) return the 1 stalk
to position B (stop).
risk of injury and/or damage.
a
1
b
c
D
E
In the event of obstacles on the
windscreen (dirt, snow, ice etc.),
clean the windscreen (including the
central area located behind the inte-
rior rear view mirror) before starting
the wipers (risk of motor overheat-
ing).
If an object is preventing a blade
from moving, it may stop functio-
ning. Remove the obstacle and
reactivate the wiper using the wiper
stalk.