sPEED limiTEr
(3/4)
4
3
varying the limit speed
The limit speed may be changed by
pressing repeatedly or holding down:
– switch 4 (RES/+) to increase speed;
– switch 3 (SET/-) to reduce speed.
2.86
Exceeding the limit speed
It is possible to exceed the limit speed
at any time. To do this: press the accel-
erator pedal firmly and fully (beyond
the resistance point).
While the speed is being exceeded, the
speed limiter flashes red on the instru-
ment panel. Then, release the accelera-
tor pedal: the speed limiter function will
return as soon as you reach a speed
lower than the memorised speed.
If the speed limiter is not
available (after several at-
tempts to activate), contact
an approved dealer.
limited speed cannot be maintained
When driving down a steep gradient,
the system may not maintain the limit
speed: the limit speed flashes in red
on the instrument panel and an audi-
ble signal sounds at regular intervals to
inform you of this situation.
cruise
control/speed
limiter with hill Descent
control:
the function may act on the
braking system.
cruise control/speed limiter with-
out hill Descent control:
The function never interacts with the
braking system.
Please note that you must always
keep your feet close to the pedals
in order to react in an emergency.