Advertisement
BIOS settings for Windows 7 and Windows 10 O/S
Windows UEFI mode for Windows 8.1/10
Vig830s system configured with Windows 8/8.1 will have following default BIOS settings. If
you wish to downgrade to Windows 7 then BIOS must be configured to Non-UEFI mode.
Boot\CSM (Compatibility Support module)
Launch CSM
Boot Device Control
Boot from Network Devices
Boot from Storage Devices
Boot from PCI-E/PCI Expansion Devices
Boot\Secure Boot Menu
OS Type
[Windows UEFI
Note
Please ensure the changes of the following settings are performed by personnel with some previous
experience/knowledge of altering BIOS settings.
Enabling Windows UEFI mode for Windows 8/8.1 & 10 Operating System
1. From the BIOS main menu bar select 'Advanced'
2. Navigate to the Boot sub menu
3. Select CSM (Compatibility Support Module)
XMA Limited
,
VHQ, 7 Handley Page Way, Old Parkbury Lane, Colney Street, St. Albans, Hertfordshire AL2 2DQ
01727 201 850
01727 201858
Tel:
| Fax:
[Enabled]
[UEFI Only]
[UEFI drivers first]
[UEFI drivers first]
[UEFI drivers first]
mode]
Figure 6
technical@viglen.co.uk
| Email:
www.xma.co.uk
| Web:
Advertisement
