Advertisement
4. In the CSM (Compatibility Support Module) change following settings for Windows 8/8.1
& 10
Launch CSM
Boot Device Control
Boot from Network Devices
Boot from Storage Devices
Boot from PCI-E/PCI Expansion Devices
When these settings have been changed, press <Esc> or the Back Button to go back to
the Boot Sub Menu to enable Windows UEFI for secure boot.
5. Navigate to Secure Boot from within the Boot sub menu.
6. Change OS Type to Windows UEFI.
XMA Limited
,
VHQ, 7 Handley Page Way, Old Parkbury Lane, Colney Street, St. Albans, Hertfordshire AL2 2DQ
01727 201 850
01727 201858
Tel:
| Fax:
[Enabled]
[UEFI Only]
[UEFI drivers first]
[UEFI drivers first]
[UEFI drivers first]
Figure 7-Compatibility Support Module
Figure 8-Secure Boot Menu
technical@viglen.co.uk
| Email:
www.xma.co.uk
| Web:
Advertisement
