Advertisement
4. Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS, and then
press <Enter>.
5. Select the correct BIOS file, and then press <Enter> to perform the BIOS update process.
6. Reboot the system when the update process is completed.
7. After restarting load BIOS setup menu by pressing < Del> or <F2> key.
8. Load Default BIOS settings by pressing <F5> key.
9. Press F10 to Save and Exit.
Note:
• This function supports USB flash disks formatted using FAT32/16 on a single partition only.
• Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the
Load Optimized Defaults item under the Exit menu.
IMPORTANT!!!!!
During the update process DO NOT shut down the PC or interrupt the process, this could cause
damage to the motherboard.
XMA Limited
,
VHQ, 7 Handley Page Way, Old Parkbury Lane, Colney Street, St. Albans, Hertfordshire AL2 2DQ
01727 201 850
01727 201858
Tel:
| Fax:
Figure 2
technical@viglen.co.uk
| Email:
www.xma.co.uk
| Web:
Advertisement
