Changing Values And Settings For A Cooking Programme - Miele DGC7440W Operating And Installation Instructions

Cleaning the steam oven
 Remove the water container and
condensate container and empty
them as required.
 Switch the steam oven off.
appears after a cooking
Appliance rinsing
programme involving steam.
 Follow the instructions in the display.
The rinsing process should be
carried out every time to flush any
remaining food deposits out of the
system.
 After each use, clean and dry the
whole appliance as described in
"Cleaning and care".
 Leave the appliance door open until
the oven interior is completely dry.
Refilling the water
If water needs replenishing during the
cooking programme, a tone will sound
and the display will prompt you to refill
the container with fresh water.
 Remove the water container and fill it
with fresh tap water.
 Push the water container into the
appliance.
 Close the control panel.
The cooking programme will continue.
Changing values and settings
for a cooking programme
Depending on the function, as soon as
a cooking programme is in progress,
you can use the  sensor to change
the values or settings for this
programme.
 Select the  sensor.
Depending on the function, the
following settings appear:
– Temperature
–
Moisture
– Duration
– Booster
–
Pre-heat
– Crisp function
Changing values and settings
 Select the desired value or setting
and confirm with OK.
 Change the value or setting and
confirm with OK.
The cooking programme will continue
with the new values and settings.
Operation
55