Problem solving guide
Problem
F10
F11
F20
F44
F55
F196
F
and other fault codes
156
Possible cause and remedy
The suction hose in the water container is
– not correctly attached.
– not positioned vertically.
Correct the position of the suction hose:
Internal drainage fault.
Descale the steam oven (see "Cleaning and care -
Maintenance").
If the fault message appears again, contact Miele.
Communication fault.
Switch the steam oven off and then back on again
after a few minutes.
If the same message appears again, call Miele.
The maximum length of time for which the steam
oven can be operated on a function has been
exceeded, so the appliance has switched itself off
automatically for safety reasons.
Switch the steam oven off and then back on again.
The steam oven is immediately ready for use again.
There is a fault.
Switch the steam oven off and then back on again.
The floor filter is not fitted correctly.
Switch the steam oven off.
Insert the filter correctly:
Switch the steam oven back on again.
If the same message appears again, call Miele.
Technical fault.
Switch the appliance off and call Miele.