Exmark LAZER Z X Series Operator's Manual page 20

Specifications
Note: Motion control levers are adjustable to
two heights.
– Separate levers, on each side of the console,
control speed and direction of travel of the
respective drive wheels.
– Steering is controlled by varying the position
of the levers relative to each other.
– Moving motion control levers outward (in
slots) locks the drive system in neutral.
• PTO Engagement Switch: Engages electric clutch
(to drive belt) which engages mower blades.
• Parking Brake Lever: Engages/Disengages
parking brake.
• Deck Height Adjustment Lever: Sets cutting
height to desired position.
• Deck Lift Pedal: Foot pedal that lifts deck.
• Transport Lock:
– Latching position: Automatically latches at
the transport position.
– Unlatching position: Deck does not latch at
the transport position.
Seat
• X-Series:
– All Models Except "B1":
Deluxe suspension (adjustable spring
suspension) seat with high back, padded
flip-up armrests, and integral safety switch.
Seat height remains the same. Seat Isolation
System for reduced vibration, to enhance ride
of standard seat.
– "B1" Models:
Standard seat with high back, foam padded
seat cushion with internal suspension,
bolstering, two-tone cover, armrests, and
integral safety switch. Seat Isolation System
for reduced vibration, to enhance ride of
standard seat.
• S-Series:
– "00" Models:
Standard seat with high back, extra wide foam
padded seat cushion with internal suspension,
thick bolstering, two-tone cover, padded
flip-up armrests, integral safety switch, and
Seat Isolation System to enhance ride of
standard seat.
– "A1" and "A2" Models:
Deluxe suspension (adjustable spring suspension)
seat with high back, padded flip-up armrests, and
integral safety switch. Seat height remains the
same. Seat Isolation System for reduced vibration,
to enhance ride of standard seat.
Optional seat accessories for units with standard
seats:
◊ Custom Ride Suspension System to enhance
standard seat. Adds approximately 3 inches (7.6
cm) to seat height.
• E-Series:
– "00" or "03" Models:
Standard seat with high back, foam padded
seat cushion with internal suspension,
bolstering, two-tone cover, molded flip-up
armrests, and integral safety switch.
Optional seat accessories for units with
standard seats:
◊ Custom Ride Suspension System
to enhance standard seat. Adds
approximately 3 inches (7.6 cm) to seat
height.
◊ Deluxe suspension seat with high back,
(adjustable spring suspension), padded
flip-up armrests, and integral safety switch.
Adds approximately 1/2 inch (1.3 cm) to
seat height.
◊ Seat Isolation System for reduced
vibration, to enhance ride of standard
seat, standard seat with Custom Ride Seat
Suspension or Deluxe Suspension Seat.
Adds approximately 1 inch (2.5 cm) to
seat height.
– "B1", "B2", or "B3" Models:
Standard seat with high back, foam padded
seat cushion with internal suspension,
bolstering, two-tone cover, padded flip-up
armrests, and integral safety switch. Seat
Isolation System for reduced vibration, to
enhance ride of standard seat.
– "A1", "A2", or "A3" Models:
Deluxe suspension seat with high back,
(adjustable spring suspension), armrests, and
integral safety switch. Adds approximately
1/2 inch (1.3 cm) to seat height.
20