Mercedes-Benz C-Class Saloon Owner's Manual page 431

Make sure on and off switch 2
#
inflation compressor is set to 0.
Insert plug 5 in a socket in your vehicle.
#
Cigarette lighter socket: ( page 130)
R →
12 V socket:
R
Observe the notes on the cigarette lighter:
R
( page 130)
→
Observe the notes on sockets:
R
Turn the key to position 1 in the ignition
#
lock.
Press on and off switch 2 on the tyre infla‐
#
tion compressor to I.
The tyre inflation compressor is switched on.
The tyre is inflated. The tyre pressure is
shown on manometer 3.
Pump the tyre to the specified tyre pressure.
#
The specified tyre pressure is printed on the
yellow label of the emergency spare wheel.
When the specified tyre pressure has been
#
reached, press on and off switch
tyre inflation compressor to 0.
The tyre inflation compressor is switched off.
of the tyre Turn the key to position g in the ignition
#
lock.
If the tyre pressure is higher than the speci‐
#
fied pressure, press pressure release valve
button 4 until the correct tyre pressure has
been reached.
Unscrew union nut
#
the valve.
If necessary, screw the plug-type connection
back onto the union nut.
Screw the valve cap onto the collapsible
#
emergency spare wheel valve again.
Stow plug 5 and the filler hose in the lower
#
section of the compressor housing.
Stow the tyre inflation compressor in the
#
vehicle.
2 on the
1 of the filler hose from
Wheels and tyres 429