Mercedes-Benz C-Class Saloon Owner's Manual page 148

146 Light and sight
Tail lamps
1 Turn signal light: bulb PY 21 W
2 Reversing light: bulb W 16 W
Changing the front bulbs (vehicles with halo‐
gen headlamps)
Fitting/removing the cover in the front
wheel arch
Requirements:
The lighting system is switched off.
R
The appropriate front wheel is turned
R
inwards.
To remove: using a suitable object, turn the
#
two mounts 1 of the cover 2
clockwise direction as far as they will go.
Remove the unlocked cover 2
#
wheel arch liner by pulling it upwards.
To fit: insert cover2 at bottom of the wheel
#
arch liner.
Using a suitable object, turn the two mounts
#
1 of the cover 2 in clockwise direction as
far as they will go.
Replacing bulbs in the halogen headlamp
Requirements:
The lighting system is switched off.
Low beam/high beam
A H7 55 W light bulb is available.
R
The bonnet is open.
R
Turn signal lights:
A PWY 24 W light bulb is available.
R
The cover in the front wheel arch has been
R
removed.
in an anti-
from the