MaxWeb XPN
Home
Plant/Logging
Overview
log values
log settings
Fig. 31: Log settings
You have the possibility to specify the following data for time intervals when collecting
the device data:
Fig. 32: Input of log settings
Logging start time:
Logging end time:
Logging interval:
Send data at:
Enter the start time of the time interval at which the time and energy
values of the devices are to be logged.
Enter the end time of the time interval until which the time and energy
values of the devices are to be logged.
Enter the time period in minutes after which the time and energy
values within the set time interval are to be logged.
Tick this option if the generated log files are to be sent once a day at
a fixed point in time. In the adjacent field, enter the point in time at
which the log files are to be sent.
en
43
Need help?
Do you have a question about the MaxWeb XPN and is the answer not in the manual?