SolarMax MaxWeb XPN Installation Instructions Manual page 30

Search settings for devices connected via Ethernet
Fig. 16: Menu: Search settings for an Ethernet connection
If your devices are connected to the MaxWeb XPN via Ethernet, please enter the following
search settings:
Select connection:
IP address:
TCP port:
Timeout:
Start address /
End address:
Device search:
30
Select the menu item "Ethernet".
Enter the IP address under which the devices are connected.
Enter the TCP port (from 1064 to 65535) for communication with
the connected devices. The same TCP port must also be set on the
inverters.
Enter a timeout for the device search in ms. We recommend you set a
longer timeout for networks under high load.
Enter the start and end address (from 1 to 249) for the address range
within which devices are to be searched for. Every device must have
its own address.
Click on the button "Start device search" to search for your connected
devices. Once the search is completed, the following message
appears:
Complete
The "Search results" window shows a list of the devices found.