Hach Lange 2100AN Basic User Manual page 7

Figure 2 Back overview
1 Power cord connector
2 Fuse holder
3 Power switch
4 DB9 connector for RS232 cable
Product components
Refer to Figure 3 to make sure that all components have been received.
If any of these items are missing or damaged, contact the manufacturer
or a sales representative immediately.
5
Supplied with 4700100 only.
6
Do not remove the plastic wrapper from the paper rolls until the paper is installed.
5 Air purge fitting
6 Recorder output jack for a chart
recorder (0 to 1 V output)
7 Remote cable jack for flow valve
module connection to the automatic
flow cell (low pressure)
8 Lamp access cover
Figure 3 Instrument components
1 2100AN turbidimeter
2 USEPA filter assembly
3 455 nm filter assembly
4 Oiling cloth
5 Six 1" sample cells (30 mL) with
caps
6 Silicone oil
7 StablCal ® Calibration kit
®
8 Gelex secondary turbidity
5
standardization kit
9 Dust cover
6
10 Printer paper roll (2x)
11 Power cord
English 7