Controlling Other Tvs With The Remote Commander - Sony SLV-SF99EN Operating Instructions Manual

Getting Started
Step 2 : Setting up the remote commander (continued)

Controlling other TVs with the remote commander

The remote commander is preprogrammed to control non-Sony TVs. If your TV is
listed in the table below, set the appropriate manufacturer's code number.
1
Set TV/VIDEO at the top of the remote commander to TV.
2
Hold down / , and enter your TV's code number(s) using the programme
number buttons.Then release / .
Now you can use the following TV control buttons to control your TV:
/ , TV/VIDEO, programme number buttons, –/– – (ten's digit), PROG +/–,
M
*
These buttons may not work with all TVs.
Tip
• When you set your TV's code number correctly while the TV is turned on, the TV turns off
automatically.
8
Setting up the remote commander
m < ,
+/–, (TV), (Teletext), FASTEXT buttons, WIDE
* * * *
/ / / , and OK
*
.
* , MENU * , CURSOR