Specifications - Sony SLV-SF99EN Operating Instructions Manual

Additional Information

Specifications

System
Channel coverage
PAL (D/K, B/G)
VHF E2 to E12, R1-R12
UHF E21 to E69, R21-R69
CATV S01 to S05, S1 to S41
RF output signal
UHF channels 21 to 69
Aerial out
75-ohm asymmetrical aerial socket
E Inputs and outputs
LINE-1 (TV)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
J
Audio output: pins 1 and 3
DECODER/ LINE-4 IN
21-pin
Video input: pin 20
Audio input: pins 2 and 6
LINE-2 IN
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms, unbalanced, sync
negative
AUDIO IN, phono jack (2)
Input level: 327 mVrms
Input impedance : more than 47 kilohms
LINE-3 IN
VIDEO IN, phono jack (1)
Input signal: 1 Vp-p, 75 ohms, unbalanced, sync
negative
AUDIO IN, phono jack (2)
Input level: 327 mVrms
108
Specifications
Input impedance : more than 47 kilohms
LINE-2 OUT
VIDEO OUT, phono jack (1)
Output signal: 1 Vp-p, 75 ohms, unbalanced, sync
negative
AUDIO OUT, phono jack (2)
Rated output level: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
General
Power requirements
220 – 240 V AC, 50 Hz
Power consumption
25 W (Normal)
3, 5 W (POWER SAVE is set to ON, no decoder)
Operating temperature
5 C to 40 C
Storage temperature
–20 C to 60 C
Dimensions
Approx. 430 × 100 × 335 mm (w/h/d)
including projecting parts and controls
Mass
Approx. 4.9 kg
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Audio cable (1)
EURO-AV cable (1)
SmartFile labels (10)
Design and specifications are subject to change without
notice.