Sony SLV-SF99EN Operating Instructions Manual page 54

Basic Operations
Recording TV programmes using the ShowView system (continued)
3
CURSOR
OK
CLEAR
4
CURSOR
CLEAR
5
OK
54
Recording TV programmes using the ShowView system
Press OK.
The date, start and stop times, programme
position, tape speed, and VPS/PDC setting
appear on the TV screen.
If "– –" appears in the "PROG."
(programme) column (this may happen for
local broadcasts), you have to set the
appropriate programme position manually.
M
• To select a normal channel.
Press CURSOR
• To select a video source from the LINE-1 (TV) or LINE-4 IN connector,
or the LINE-2 IN or the LINE-3 jacks.
Press INPUT SELECT to select the desired video source.
You will only have to do this operation once for the referred channel. The
VCR will then store your setting.
For details of the VPS/PDC function, see "Timer recording with VPS/PDC
signals" on page 55.
If the information is incorrect, press CLEAR to cancel the setting.
If you want to change the date, tape speed,
<
and the VPS/PDC function setting:
1 Press CURSOR
item you want to change.
M
2 Press CURSOR
• To record the same programme every
day or the same day every week, see
"Daily/weekly recording" on page 55.
• To use the VPS/PDC function, set VPS/PDC to ON. For details of the
VPS/PDC function, see "Timer recording with VPS/PDC signals" on
page 55.
• To change the setting, press MENU, and highlight LIST, then select
TIMER LIST and press OK. To enter the timer setting and change it,
press again OK.
If the informations are not correct, press CLEAR to cancel the settings.
Press OK to confirm the setting.
m
/ to select the desired programme position.
,
/ to highlight the
m
/ to reset it.
T I ME R
1. 1 FR
D A T E T I M E PROG.
T ODA Y
1 7 : 3 0 1 8 : 3 0 C T 1
VPS
S P / L P S P OFF
PDC
L I S T
S E L E C T :
S E T :
CON F I R M :
O K
T I ME R
1. 1 FR
D A T E T I M E PROG.
T ODA Y
1 7 : 3 0 1 8 : 3 0 C T 1
VPS
S P / L P S P OFF
PDC
L I S T
S E L E C T :
S E T :
CON F I R M :
O K