Adjusting The Picture - Sony SLV-SF99EN Operating Instructions Manual

Adjusting the picture

Adjusting the tracking
Although the VCR automatically adjusts the
tracking when playing a tape (the
flashes in the display window, then goes off),
distortion may occur if the tape was recorded in poor
condition. In this case, manually adjust the tracking.
During playback, press TRACKING +/– to display
the tracking meter. The distortion should disappear
as you press one of the two buttons (the
lights up). To resume automatic tracking
adjustments, eject the tape and re-insert it.
To set the tracking to the centre position, press
TRACKING + and – buttons at the same time.
About the Reality Regenerator (RR) function
The Reality Regenerator (RR) function automatically restores the picture to its
original quality during playback.
To use the RR function, press
REALITY REGENERATOR. The
REALITY REGENERATOR
indicator lights up. You can set RR to
HIGH or NORMAL in the VIDEO
OPTIONS menu (see page 71).
To turn it off, press REALITY
REGENERATOR. The REALITY
REGENERATOR indicator lights off.
About the Optimum Picture Control (OPC) function
The Optimum Picture Control (OPC) function
automatically improves recording and playback
quality by adjusting the VCR to the condition of the
video heads and tape. To maintain better picture
quality, we recommend that you set OPC to ON in
the VIDEO OPTIONS menu (with the OPC
indicator in the display window lit). For details, see
page 71.
OPC playback
The OPC function automatically works on all types of tapes, including rental tapes
and tapes that were not recorded with OPC.
indicator
indicator
g
REALITY REGENERATOR
Additional Operations
NORMAL TRACKING
Tracking meter
V I D E O O P T I ON S
O P C O N
ED I T O F F
SH AR P N E S S N R O MA L
A T O
CO LO UR S Y S T E M U
R R NORMA L
S E L E C T :
S E T :
OK
continued
Adjusting the picture
69