Setting the timer manually
If the ShowView system is not available in
your area, follow the instructions below to set
the timer to record programmes.
...
Before you start
• Check that the VCR clock is set to the
correct time and date.
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
• To record from a decoder, turn it on.
• Turn on your TV and set it to the video
channel.
• If you insert a tape with the SmartFile
function, make sure the total recording
time doesn't overlap the protected
programme. For details about the
SmartFile function, see page 78.
• Set TIMER OPTIONS to STANDARD or
VARY in the OTHER OPTIONS menu
(see page 73).
Basic Operations
/
OK
M/m/</,
CURSOR
1
2
3
Programme
4
5
6
number
7
8
9
buttons
0
INPUT
SELECT
STOP
continued
Setting the timer manually
TIMER
57