Sony SLV-SF99EN Operating Instructions Manual page 75

Operation
(when recording on this VCR)
Before you start editing
• Turn on your TV and set it to the video
channel. Press INPUT SELECT to display
"L2" (or "L3" or "L4") in the display window.
• Press SP/LP to select the tape speed, SP or
LP.
• On this VCR, set EDIT to ON in the
VIDEO OPTIONS menu to display
"EDIT" in the display window. If the other
VCR has a similar feature, activate this one
as well.
1
Insert a source tape with its safety tab removed into the other (playback) VCR.
Search for the point to start playback and set it to playback pause.
2
Insert a tape with its safety tab in place into this (recording) VCR. Search for the
point to start recording and press
3
Press
4
To start editing, press the
To stop editing
Press the
Tip
• To cut out unwanted scenes while editing, press
scene begins. When it ends, press
Note
• If you start editing following the procedure above, the VCR won't start recording with the
OPC function. To record a tape with the OPC function, press
pause in step 3 so the VCR analyses the tape. Then, when you start editing in step 4, press
PAUSE after the OPC indicator stops flashing. If you press
indicator stops flashing, the OPC function is cancelled.
REC on this VCR to set it to recording pause.
PAUSE buttons on both VCRs at the same time.
STOP buttons on both VCRs.
g
PAUSE.
PAUSE on this VCR when an unwanted
PAUSE again to resume recording.
Editing with another VCR or stereo system
Additional Operations
REC
PAUSE
V I D E O O P T I ON S
O P C O N
ED I T O N
SH AR P N E S S N R O MA L
CO LO U R S Y S T E M A T U O
R R NORMA L
S E L E C T :
S E T :
OK
REC again during recording
PAUSE before the OPC
75