Sony SLV-SF99EN Operating Instructions Manual page 79

SmartFile function
Labelling a recorded programme and tape (page 88)
You can attach an electronic "label" to the video tape and its programmes on the
SmartFile list. Labelling the recorded programmes enables you to find a programme
easily when you want to play it back. If TV guide pages are available in the Teletext,
labelling recorded programmes is done automatically. Also, once you label a
programme which you set to record regularly (i.e everyday, same day of the week,
etc.), the VCR recognizes the label and will automatically label all future recordings
of the same programme.
Registering the contents of a recorded tape in the
SmartFile label (page 96)
You can register programmes recorded on a tape in the memory of a new SmartFile
label.
Protecting a recorded programme (page 98)
You can protect a recorded programme from accidental over-recording or erasure.
Erasing the data of an unwanted programme (page 100)
By erasing a programme from the SmartFile list, the VCR will record over the
unwanted programme.
Running a demonstration
This VCR can give a demonstration of
g
the various SmartFile functions.
To run a demonstration, turn on the
VCR and hold the SMARTFILE button
SMARTFILE
for 3 seconds while no tape is inserted.
The VCR outputs a beep and the
message "No SmartFile" appears on
the TV screen. The demonstration
begins. To stop the demonstration,
press any key.
79
About the SmartFile function