Additional Connections - Sony SLV-SF99EN Operating Instructions Manual

Additional connections

To a stereo system
You can improve sound quality by
connecting a stereo system to the AUDIO
OUT R/L jacks as shown on the right.
To a TV that has phono type audio/
video input jacks (only if you don't
connect the VCR and your TV using a
EURO-AV connector)
This additional connection improves picture
and sound quality. Connect the TV as shown
on the right using a commercially available
connecting cable like the Sony VMC-810. If
your TV has only one audio input jack, use a
connecting cable like the Sony VMC-
910MS.
To a satellite tuner
You can watch programmes from the satellite
tuner connected to this VCR on the TV even
when the VCR is turned off using the Line
Through function. When you turn on the
satellite tuner, this VCR automatically sends
the signal from the satellite tuner to the TV
without turning itself on.
1
Connect the satellite tuner to the DECODER/LINE-4IN connector as shown
above.
2
Set DECODER/LINE-4 to LINE-4 in the OTHER OPTIONS menu.
3
Set POWER SAVE to OFF in the OTHER OPTIONS menu.
4
Turn off the VCR.
To watch a satellite programme, turn on the satellite tuner and the TV.
For details, see page 37.
AUDIO OUT
R/L
Audio cable (supplied)
LINE-2 OUT
VMC-810 cable (not supplied)
DECODER/
LINE-4IN
EURO-AV cable (supplied)
: Signal flow
Getting Started
LINE IN
LINE OUT
LINE OUT
continued
Connecting the VCR
15