Adjusting The Picture - Sony SLV-ED95MN/TH Operating Instructions Manual

Adjusting the picture

Adjusting the tracking
Although the VCR automatically adjusts the tracking when playing a tape
(the indicator flashes in the display window, then goes off), distortion
may occur if the tape was recorded in poor condition. If so, manually adjust
the tracking.
Press the TRACKING +/– buttons on the VCR to
display the tracking meter. The distortion should
disappear as you press one of the two buttons (the
indicator lights up). To resume automatic
NORMAL TRACKING
tracking adjustment, eject the tape and reinsert it.
– – – – – – – – – – – – – – – – –
Tracking meter
About the R 2 (Reality Regenerator) function
2
The R function automatically
adjusts the picture to the most
suitable quality during playback.
2
When playback starts, the R
2
function activates and the R
2
R
button lights up.
Each pressing of the button changes the effect and indication in the display
window as follows:
REAL (status of playback started) SOFT DYNA (dynamic)
46
Additional Operations