Additional Connections - Sony SLV-X9G Operating Instructions Manual

Additional connections

To a stereo system
You can improve sound
quality by connecting a
stereo system to the
L/G jacks as shown on the
right.
To use the Line Through
function when
connecting to video
equipment other than a
Set-Top Box
Using the Line Through
function, you can watch
programmes from other
equipment connected to this
VCR on the TV even when
the VCR is turned off. When
you turn on the other
equipment, this VCR automatically sends the signal from the other
equipment to the TV without turning itself on.
1
Connect the other equipment to the LINE-3 IN connector as shown
above.
2
Set POWER SAVE to OFF or PARTIAL in the OPTIONS-2 menu.
3
Turn off the VCR.
To watch a programme, turn on the other equipment and the TV.
Note
• You cannot watch programmes on the TV while recording unless you are recording
a programme from other equipment.
R/D
Audio cable (not supplied)
: Signal flow
t LINE-3 IN
: Signal flow
R/D L/G
LINE IN
LINE OUT
Scart cable (not supplied)
Connecting the VCR
19