Gnss Spider Logging Session - Leica GR10 Operational Manual

8: GNSS Spider / Remote Access

GNSS Spider logging session

MDB logging on the GR10 can be configured and started from GNSS Spider via an active site.
Please see the GNSS Spider online help for more information on how to configure an active GR10 site.
Only one logging session can be configured and started from GNSS Spider.
When logging is configured in GNSS Spider and the settings have been uploaded to the receiver, a GNSS Spider
logging session appears in the GNSS management / Logging sessions page and in the Status / Logging
sessions page.
The Spider logging session is called __spider (with two _) and is activated by starting the site in GNSS Spider.
Per default the logged MDB data is stored in the folder Data\__spider on the receivers SD card. This folder can be
changed in the web interface configuration. GNSS Spider will still be able to download the files.
Please note that a GNSS Spider logging session is always created with the priority setting high. This means that if
other logging sessions, created via the web interface, are running on the receiver and Smart clean up is activated,
the priority setting of the GNSS Spider site guarantees that the data for this site will be protected before lower priority
logging sessions on the receiver.
Logging sessions created in GNSS Spider and uploaded to the receiver can be deactivated by stopping the site in
GNSS Spider or by pressing the deactivate button in the web interface of the GR10.
227