2.
INSTALLATION
The appliance must be installed in accordance with professional good practice and in
compliance with the national regulations in force for hydraulic and electrical
connections, under the entire responsibility of the installer.
This appliance must be installed in covered premises, sheltered from frost and
having sufficient upper and lower ventilation.
Installation of the water heater with its raising feet (label A)
Installation of heating components (label B)
Installation of hydraulic accessories (Option)
Installation of safety unit + drain (Option)
Installation of M1 or M0 insulation (label D)
Hydraulic connection (label C)
Principle with 1 water heater
Principle with two water heaters in series
Hydraulic tests
Electrical connection
Assembly test
EN
IMPORTANT
INSTALLATION OF THE APPLIANCE
B
10
:
C
D
A
Document ref.: 428016 03