Wire The I/O Connector - Omron Sysmac NYB-0 Series Hardware User Manual

5 Installation
5-4-4

Wire the I/O Connector

This section describes how to wire the I/O connector.
I/O Connector Wiring Materials
Use the supplied I/O connector to connect the inputs and outputs to the Industrial Box PC.
Recommended I/O conductor sizes for the connector are provided in the table.
Solid conductor
Flexible conductor
Flexible conductor, with ferrule and no plastic sleeve
Flexible conductor, with ferrule and plastic sleeve
Minimum AWG according to UL/cUL
Maximum AWG according to UL/cUL
I/O Connections
This section describes I/O connection details.
1
2
Pin
1 Power Status Output
2
5-36
Wire type
3
5
4
6
Description
Conductor cross-section
2
0.2 to 1.5 mm
2
0.25 to 1.5 mm
2
0.25 to 0.75 mm
24
16
Internal Circuit Details
The Power Status Output has an internal relay. Wire this
according to the input device connected to the Power Sta-
tus Output.
NY-series Industrial Box PC Hardware User's Manual (W553)