Omron Sysmac NYB-0 Series Hardware User Manual page 188

7 Maintenance
7
Align the connectors of the replacement drive as shown A on the bracket. Then insert the re-
placement drive
with a torque of 0.35 N·m.
8
Insert the bracket with the replacement drive into the correct bay of the Box PC.
Ensure the bracket is completely in the Box PC with an extra push.
The drive bracket will lock into place when it is fully inserted.
7-14
1
in the bracket and insert the 4 mounting screws
2
A
NY-series Industrial Box PC Hardware User's Manual (W553)
. Tighten these screws