Table of Contents
Advertisement
In addition, equipping the furnace with the ash-removal mechanism with mo-
ving grates allows the use of fuels with a tendency to slag formation.
The appropriate selection of biomass ensures not only saving the consump-
tion of fuel (effective combustion), but also reduces the time required for the use
of the boiler.
Use of the recommended type of fuel ensures correct and trouble-free ope-
ration of the feeder and the boiler, economical fuel consumption compared with
poor quality pellets and also reduces the emission of harmful compounds during
the combustion process.
Fuel of poor quality parameters (high water content, low calorific value, pre-
sence of stones, etc.) may cause problems with selection of settings for optimum
boiler operation, leading to formation of sinter on the furnace and high fuel losses
with ash.
NOTICE: In the actual conditions the fuel consumption may differ from
the one given in table 2. The fuel consumption is impacted the
quality of the fuel, type of heating installation, operating para-
meters of the boiler, chimney, degree exchanger contamination,
inside and outside temperature of the heated building, building
insulation.
NOTICE: The fuel tank should be loaded with fuel free of water and exces-
sive quantities of fine fractions or foreign bodies! High humidity
and pollution delivered to the reservoir with fuel adversely affect
the viability of the hopper! Use fuels recommended by the manu-
facturer (possibly certified)!
The fuel landfill should be protected against the effects of weather conditions.
For that purpose prepare the dry, covered and ventilated place. The fuel stora-
ge area should allow for the storage during the whole heating season.
7. BOILER INSTALLATION GUIDELINES
The boiler must be installed by qualified personnel holding relevant licences
(a professional, appropriately trained and holding required licences to perform
maintenance and repair works). An installer is obliged to become thoroughly
acquainted with the product and its function, and an operating mode of its pro-
tective systems.
They should provide necessary minimum information on the boiler start-up
and daily operation to its final user.
Before starting to connect the boiler to a heating system, you must read
and understand the operation and maintenance manual.
24
Advertisement
Table of Contents
