Setting the Code for
Audio and Visual
The Commander is preset at the
factory to operate Sony brand AV
components (see the table below).
If you are using the Commander
with a factory-set Sony
components, skip the following
You can use the Commander with
other major brand preset AV
components also. To use with
other AV components, or Sony
components which do not
function with the Commander,
you need to follow the procedures
to set the correct codes for each
An MD player and a DAV can be set to
any of the above Component Select
buttons. You can assign Component
Select buttons to freely set signals of
your desired components. For further
information, see "Assigning Other
Components to the Component Select
Buttons" (page 33) .
For the functions of buttons as for each
component, see "Table of Preset
Functions" (page 39).
Sony cable box
Setting a component code
Example: To set up a Philips' TV
See the tables in the
Code Numbers," and find
the four-digit component
code number for the
If more than one code number
is listed, use the number that is
For example, to set up a
Philips' TV, you would use the
code number 8011.
Press and while holding
SET, press MENU.
The SET indicator lights up.