Download  Print this page

Getting Started; Installing The Batteries; When To Replace The Batteries - Sony RM-VL610 Operating Instructions Manual

Integrated remote commander
Hide thumbs

Advertisement

Getting Started

Installing the
Batteries
Slide open the battery
compartment lid and insert two
size AA (R6) batteries (not
supplied). Be sure to match up the
+ and – indications on the
batteries with the + and –
indications on the battery
compartment.
Insert the batteries (negative end
first) through the guide clamp
within each compartment as
shown above.
8
When to replace the
batteries
Batteries for remote control
operation (two size AA (R6)
batteries)
Under normal conditions, the
batteries will last up to 1 year. If
the Commander does not operate
properly, the batteries might be
drained. When this happens,
replace the batteries with new
ones.
Note
Do not take more than one hour to
replace the batteries. Otherwise, your
code number settings (page 10) and
"learned" remote control signals (page
16) will be erased.
Notes on batteries
• Do not use an old battery with a new
one, or mix different types of
batteries together.
• If the electrolyte inside the battery
should leak, wipe the contaminated
area of the battery compartment with
a cloth and replace the old batteries
with new ones. To prevent electrolyte
from leaking, remove the batteries if
you plan not to use the Commander
for a long period of time.

Hide quick links:

Advertisement

loading

  Also See for Sony RM-VL610

  Related Manuals for Sony RM-VL610

This manual is also suitable for:

Rm-vl610bRm-vl610n