Using Non-Preset Remote Control Operations - Learning Function - Sony RM-AV2100T Operating Instructions Manual

Using Non-Preset
Remote Control
Operations
— Learning Function
To operate non-preset components or
functions, use the following "learning"
procedure to "teach" any of the
programmable buttons and keys to
operate the functions of another remote
control. You can also use the learning
function to change the signal of
individual keys and buttons after setting
the component code number (page 8).
It is useful if you make a memo of the
learned key functions in the LCD touch
key display table (Refer to the separate
volume of "Component code numbers.").
Note
Some specific remote control signals may not
be learned.
16
GB
Example: To programme the N
(Play) signal of your component
to the VCR1 N (Play) key of the
Commander
1
Place the RM-AV2100T head to
head with your component's
remote control.
Remote control for
your component
about 5 – 10 cm
(2 – 4 inches) away
2
While pressing COMMANDER
OFF, press the Component Select
button for the component whose
signals are to be learned.
"LEARN" appears and all the
learnable keys flash.
Display for PROGRAM, 2 and % buttons
RM-AV2100T