Vcr 1, 2, 3; Dvd - Sony RM-AV2100T Operating Instructions Manual

VCR 1, 2, 3

KEY DISPLAY FUNCTION
1 To turn the power on/off
1 – 9, 0 To change the programme
Also to turn on
1-, -/- - To select doble-digit
numbers.
Works in the same way as the
TV's commander.
2- To select a number between
20 and 29
INPUT To change the input mode
DISPLAY To activate the on-screen
display
ANT/SW To switch the aerial output
MENU To call the MENU display
To move the cursor upward
M
m To move the cursor
downward
To move the cursor to the
,
right
< To move the cursor to the left
EXECUTE To enter the selection of the
MENU display
m To rewind
To play
N
M To fast-forward
REC To record, press N while
pressing REC.* First release
N, then release REC.
x To stop
X To pause
PROGRAM +/– Programme up: +
Programme down: –
* In order to avoid recording by mistake, the
REC key does not work by itself. You can
assign this operation (record) to a single key
using the learning function (page 16).

DVD

KEY DISPLAY FUNCTION
1 To turn to the power on and
off
1 – 9, 0 Number buttons: To set items
selected from the screen
+10 To select numbers 10 and
above
ENTER To enter a setting or to set
items selected from the screen
AUDIO To change the sound
DISPLAY To show the current play
status on the screen
ANGLE To switch angle
CLEAR To clear the selected
characters from the screen
RETURN To return to the last previous
screen
TITLE To display the title menu
SUB TITLE To switch the subtitle
DVD MENU To display the DVD menu
To move the cursor upward
M
To move the cursor
m
downward
To move the cursor to the
,
right
To move the cursor to the left
<
EXECUTE To execute items selected
from the screen
m To rewind
N To play
M To fast-forward
x To stop
X To pause
> To proceed to the next
location or song
. To proceed to the previous
location or song
57
Continued
GB