Sony RM-AV2100T Operating Instructions Manual page 21

To clear all signals learned for a
specific component
1
While pressing COMMANDER
OFF, press the corresponding
Component Select button.
When you want to clear signals
learned for DECK B/A
Press DECK B/A to display "DECK A"or
"DECK B". You can not clear both decks at
the same time.
2
While pressing the RESET key,
press that Component Select
button again.
The learned contents are cleared. The
keys for the component return to their
original states before learning.
3
Press COMMANDER OFF.
Note
For DECK B/A, be sure to display the deck
that has a learned signal ("DECK A" or "DECK
B") before you perform the steps above. If you
reset the wrong deck, the component codes for
both A and B will be reset to the factory
settings (page 8).
21
GB