Sony RM-AV2100T Operating Instructions Manual page 55

Symptom
The power of the
Commander turns off by
itself.
The power of the
Commander does not
turn on when you press a
button.
Your Commander does
not work as expected
after data transfer.
Note on the data transmission with Sony RM-AV2100T
When transferring data between this commander and another Sony RM-AV2100T remote
commander, some functions may not be able to be transferred (e.g. system control function).
Remedy
• This Commander is preset at the factory to switch the power off
automatically after 10 minutes if left unused. (Auto Power-Off, page 47)
You can change the power-off time from 10 to 90 minutes, or set the
Commander not to power off automatically.
• The Hold function is on ("OFF" appears on the display). Unlock the
Hold function (page 45).
• Data transfer to/from a single button cannot transfer System Control
functions that are learned by Component Select buttons. Either set up
the learned Commander from the start, or perform whole data transfer.
55
GB