Appendix; Table Of Preset Functions - Sony RM-AV2500 Operating Instructions (primary manual) Operating Instructions Manual

Appendix

Table of Preset
Functions
Note
There may be some components or functions
that cannot be operated with this Commander.
TV
KEY DISPLAY FUNCTION
POWER To turn the power on/off
1 – 9, 0, ENTER To change the channel
For example, to change to
channel 5, press 0 and 5 (or,
press 5 and ENTER)
INPUT To change the input mode
DISPLAY To display the current
channel on TV
SLEEP To operate SLEEP function on
the TV (works only for a TV
with SLEEP function)
WIDE To switch to WIDE
MENU To call up the MENU display
R To move the cursor upward
r
To move the cursor
downward
t To move the cursor to the
right
T To move the cursor to the left
OK To enter the selection of the
MENU display
PIP ON/OFF To turn on/off the "window"
picture
PIP OFF To turn off the "window"
picture
PIP CH+/– To change the TV channel in
the "window" picture
PIP INPUT To change the input mode of
the "window" picture
PIP MOVE To move the location of the
"window" picture
PIP STILL To freeze the "window"
picture
PIP SWAP To swap the "window"
picture
KEY DISPLAY FUNCTION
CHANNEL +/– Channel up: +
Channel down: –
RECALL To operate JUMP,
FLASHBACK or CHANNEL
RETURN function on the TV
depending on the setting of
the TV's manufacturer
VOLUME +/– Volume up: +
Volume down: –
MUTING To mute the volume on the
TV. Press again to turn
muting off.
ANT/SW To switch the multiplex
antenna input
SUB TITLE To display the CRT screen
subtitle
EXIT To exit the mode
Continued
59