Sony RM-AV2500 Operating Instructions (primary manual) Operating Instructions Manual page 42

Selecting a Channel with a Single
Key Press (continued)
Example: To program TV channel
123 for the PIP INPUT key
1
While pressing COMMANDER
OFF, press MUTING.
2
While pressing CHANNEL +,
press the Component Select
button (TV).
3
Press the macro key (in this case,
PIP INPUT).
The selected macro key lights. The
number keys and "ENTER" flash.
42
4
Press the keys for the operation in
order (1t 2 t 3 t ENTER).
Note
If you enter more than four keys, the
last four keys are programmed for the
macro key.
5
Press the EXIT button to confirm
the Channel Macro.
"1," "2," "3," and "ENTER" appear
twice.
Note
If you enter more than four keys, the
last four keys are programmed for the
macro key.
6
Press COMMANDER OFF.
Notes
• You cannot program the Channel Macro
function for a macro key that has "learned" a
signal. Try again with another macro key, or
clear the "learned" signal (page 19) from the
button and program the Channel Macro
function on it.
• If you change the component code for a key
that has been programmed with the Channel
Macro function, the new signal is transmitted
when you press the corresponding macro
key.