Daily Checks; Checking Of Engine Oil Level - Kubota D1803-CR-TIE4 Operator's Manual

14 MAINTENANCE

DAILY CHECKS

For your own safety and to assure the long life of your
machine, a careful check should be made before each
operation.
BChecking of engine oil level
To avoid personal injury or death:
A Be sure to stop the engine before
checking and changing the engine
oil and the oil filter cartridge.
A Do not touch muffler or exhaust
pipes while they are hot; Severe
burns could result. Always stop the
engine and allow it to cool before
conducting
maintenance, or for a cleaning
procedure.
A Contact with engine oil can damage
your skin. Put on gloves when using
engine oil. If you come in contact
with engine
immediately.
A Do not operate a diesel engine when engine oil is
overfilled. This oil can drain through the air intake
system, which cause engine disacceleration and oil
leaks from breather piping. It could result in a
overrunning or oil hammering of engine in case of the
engine with suction blow-by gases breathed in.
1. Check the engine oil level before starting or more than
5 minutes after stopping the engine.
2. Remove the oil level gauge, wipe it clean and reinstall
it.
3. Take the oil level gauge out again, and check the oil
level.
[D1803-CR-TIE4, V2403-CR-TIE4]
(1) Oil filler plug [Lower end of oil level gauge]
(2) Oil level gauge (A) Engine oil level within this range is proper.
inspections,
oil, wash it off
[V2607-CR-TIE4, V3307-CR-TIE4]
(1) Oil filler plug [Lower end of oil level gauge]
(2) Oil level gauge (A) Engine oil level within this range is proper.
[V3800-TIE4]
(1) Oil filler plug
(2) Oil level gauge
[Lower end of oil level gauge]
(A) Engine oil level within this
range is proper.