Vitodens 200-W B2HA 112, 150, 399, 530 Installation
Accessory Kit
Boiler
Control
KM Bus
Accessory
Closing the Control Unit
Extension Module EA1
Accessory kit connections for heating circuit with
mixing valve
The mixing valve controller kit can only be used with
wall-mounted gas-fired hot water heating boilers and
a weather-responsive control (it can be used as an
alternative for a Vitotronic control HK1B).
For details on coding and connection to the
control, refer to the Vitodens 200-W B2HA
Service Instructions.
For details on installation, refer to the accessory
kit Installation Instructions.
Closing the control cover
1. Install the cover onto the control board.
2. Flip the control board back into position.
3. Secure the locking tabs as shown.
Control Connections
57