Table of Contents
Advertisement
Maintenance
9.2 Inspection and maintenance
9.1.2
Touch up any damaged paintwork
If the paint is damaged, it must be repaired in order to protect the unit against corrosion.
Note
Paint system
Contact the Service Center (Page 109) before you repair any damage to paint. They will provide
you with more information about the correct paint system and methods of repairing paint
damage.
9.2
Inspection and maintenance
9.2.1
Safety instructions for inspection and maintenance
Rotating and live parts
Electric machines contain live and rotating parts. Fatal or serious injuries and substantial
material damage can occur if maintenance work is performed on the machine when it is not
stopped or not de-energized.
● Perform maintenance work on the machine only when it is stopped. The only operation
● When performing maintenance work, comply with the five safety rules.
Machine damage
If the machine is not maintained it can suffer damage. This can cause faults which can result
in eventual or immediate death, serious injury or material damage.
Perform regular maintenance on the machine.
Dust disturbances when working with compressed air
When cleaning with compressed air, dust, metal chips, or cleaning agents can be whirled up.
Injuries can result.
When cleaning using compressed air, make sure you use suitable extraction equipment and
wear protective equipment (safety goggles, protective suit, etc.).
82
WARNING
permissible while the machine is rotating is regreasing the rolling bearings.
WARNING
CAUTION
1PC134, 1PC136 crane motors SH 132 ... 315
Operating Instructions, 02/2019, A5E43212221A
Advertisement
Table of Contents
