Installing Filter Mats; Touch Up Any Damaged Paintwork; Maintaining Terminal Boxes - Siemens SIMOTICS FD 1LM1 Operating Instructions Manual

Maintenance
9.1 Inspection and maintenance
9.1.13

Installing filter mats

1. Screw the inner cage
2. Place the filter mat over the inner cage The filter mat must not develop folds or creases.
3. Place the outer cage
9.1.14

Touch up any damaged paintwork

If the paint is damaged, it must be repaired in order to protect the unit against corrosion.
Note
Paint system
Contact the Service Center (Page 157) before you repair any paint damage. They will provide
you with more information about the correct paint system and methods of repairing paint
damage.
9.1.15

Maintaining terminal boxes

Requirement
The machine is de-energized.
122
①
②
centrally located screw, see Tightening torques for screw and bolt connections (Page 159),
Case C.
to the machine.
over the inner cage with the filter mat. Fix the outer cage using the
SIMOTICS FD 1LM1
Operating Instructions 01/2019