Using The Telephone; Getting To Know Your Telephone - Gigaset E370 Manual

Getting to know your telephone

Switch the handset on/off
¤
Switch on: When the handset is switched off, press and hold the End call key
¤
When the handset is in idle status, press and hold the End call key
Switch off:
Lock/unlock the keypad
The keypad lock prevents any accidental use of the telephone.
Lock/unlock the keypad:
Keypad lock activated: the following symbol appears
If a call is indicated on the handset, the keypad automatically unlocks and you can
accept the call. It then locks again when the call is finished.
It is not possible to call emergency numbers either when keypad lock is activated.
Control key
The control key enables you to navigate the menus and input fields, and also to
call up certain functions depending on the situation.
In the description below, the side of the control key (up, down, right, left) that you have to press
in the different operating situations is marked in black, e. g.
key" or for "press the centre of the control key".
In idle status
Open the directory
Open the main menu
Open the list of handsets
In submenus, selection and entry fields
Confirm a function
During a conversation
Open the directory
Mute the microphone
Initiate an internal consultation call
Adjust the loudspeaker volume for receiver and handsfree mode

Using the telephone

Press and hold
Getting to know your telephone
for "press right on the control
Press briefly
or
11