Preparing The Telephone For Use - Gigaset 5020 Quick Manual

All electrical and electronic equipment must be dis-
posed of separately from general household waste
using the sites designated by local authorities..
If a product displays this symbol of a crossed-out rubbish
bin, the product is subject to European Directive 2002/96/
EC.
The appropriate disposal and separate collection of used
equipment serve to prevent potential harm to the environ-
ment and to health. They are a precondition for the re-use
and recycling of used electrical and electronic equipment.
For further information on disposing of your used equip-
ment, please contact your local authority or your refuse col-
lection service.

Preparing the telephone for use

Recommended installation of telephone
◆
Do not expose the telephone to direct sunlight or other
sources of heat.
◆
Operate at temperatures between +5°C and +40°C.
◆
Maintain a distance of at least one metre between the
telephone and radio equipment, e.g. wireless
telephones, wireless pagers or TV sets. Otherwise,
telephone communication could be impaired.
◆
Do not install the telephone in dusty areas as this can
shorten the service life of the telephone.
◆
To clean, wipe with a moist or antistatic cloth only, never
with a dry cloth (risk of electrostatic charging and
discharge) or harsh cleaning agent.
◆
Furniture lacquer and polish can be damaged by contact
with parts of the unit (e.g. device feet).
2
GB
Connecting
Insert the short end of the coiled handset cord in the socket
provided in the handset and the long end in the socket
a
marked with an on the underside of the device. Plug the
phone cord into the outlet on the wall and the other end
into the socket marked with a
device. Then your telephone is ready to use.
Setting the internal clock
?3
Initiate function.
The current set time is displayed in 24-hour
mode (default setting: 00:00).
o
Enter the correct time in hours <hh> and
minutes <mm> (24-hour mode).
?
Press the Set key.
Y
on the underside of the