Repeater - Gigaset E370 Manual

Repeater

A repeater increases the receiving range between the Gigaset handset and the base station.
The registration procedure for a repeater depends on the version of the repeater being used.
•
Repeater without encryption, e.g. Gigaset repeater prior to Version 2.0
•
Repeater with encryption, e.g. Gigaset repeater later than Version 2.0
Further information about the Gigaset repeater can be found in the repeater user guide and at
www.gigaset.com.
Repeater without encryption
Activate Maximum Range/deactivate No Radiation
¤
. . . use
Range Change (
Deactivate encryption
¤
. . . use
Change ( = deactivated)
Registering a repeater
¤
Connect the repeater to the mains power supply
key on the telephone base station (min. 3 secs) . . . the repeater is automatically registered
It is possible to register more than one Gigaset repeater.
Repeater with encryption
Encryption is activated (default setting).
Registering a repeater
¤
Connect the repeater to the mains power supply
key on the telephone base station (min. 3 secs) . . . the repeater is automatically registered
Up to 2 repeaters may be registered.
The ECO DECT function Maximum Range is activated and the No Radiation function is
deactivated. The settings cannot be changed whilst the repeater is registered.
As soon as a repeater is registered, it will appear in the repeater list under
Settings System
De-registering a repeater
¤
. . . use
OK . . . use
to select Settings
= on) No Radiation
to select Settings
Repeater
to select Settings
to select repeater
OK ECO DECT
Change (
OK System
Press and hold the Registration/paging
Press and hold the Registration/paging
OK System
De-reg. Yes
Repeater
OK Maximum
= off )
OK Encryption
OK Repeater
51