Operation With A Router; Operation With A Pabx - Gigaset E370 Manual

Operation with a router

Operation with a router
When operating on the analogue connection of a router, any echoes that may occur can be
reduced by activating XES mode 1 (XES = eXtended Echo Suppression).
If the XES mode 1 does not sufficiently suppress the occurring echoes: activate XES mode 2.
¤
OK Normal mode
OK XES mode 1
OK XES mode 2
If there are no problems with echoes, the normal mode (factory settings) should be
activated.

Operation with a PABX

To find out which settings are required for a PABX, please refer to the PABX user guide.
You cannot send or receive SMS messages on PABXs that do not support Calling Line
Identification.
Setting Tone or Pulse dialling mode
¤
. . . use
Mode OK
Setting the flash time
¤
. . . use
. . . possible flash times are listed
52
to select Settings
. . . use to select Tone or Pulse
to select Settings
. . . use
. . . press one of the following keys
OK Telephony
Select (
OK Telephony
to select flash time
OK Dialling
= selected)
OK Recall
Select ( = selected)
OK