Setting Up; Choosing The Power Sources - Sony ZS-D7 Operating Instructions Manual

Setting Up

Choosing the
power sources
You can use the AC power or
batteries as a power source.
Use the AC power source
whenever you record since
recording consumes much
power.
Note
Be sure to turn off the
power of the player
before connecting/
disconnecting the AC
power cord or
removing/inserting
batteries.
Tips
• With normal use, the
back-up batteries
should last for about
six months when the
player is operated on
batteries. When the
time display dims or
when the timer
function is disabled,
replace all the batteries
with new ones. To
save the preset
settings, replace the
batteries with the AC
power cord connected.
• The sound quality may
be changed depending
on the polarity of the
plug. Change the
direction of inserting
the plug and check the
sound quality.
1
Battery compartment
(back-up batteries)
4
Battery compartment
1 Inserting the back-up batteries
Insert four R6 (size AA) batteries (not
supplied) into the battery compartment.
These batteries work to save the
memory data.
Insert four R6 (size AA)
batteries (not supplied)
Replacing batteries
To take out the batteries as illustrated.
2 Connecting the AC power cord
Insert one end of the supplied AC power cord to the
AC IN socket located at the rear of the player, and the
other end to the wall outlet.
AC IN
2
To a wall outlet
Setting Up
39 EN