Recorder - Sony ZS-D7 Operating Instructions Manual

Connecting a portable MiniDisc recorder (continued)
Tip
To record a track from
a number of different
CDs, EDIT 1 TRACK is
useful (page 29).
1 Do steps 2 through 6
on pages 29 and 30.
2 Press DUB START
CD m MD.
When recording of a
certain track has
finished, the CD and
MD enter stop mode.
To record on an MD
using the analog
connections:
1 Connect the optional
audio connecting
cord (RK-G136, etc.)
to the LINE OUT jack
on this player and the
LINE IN (OPTICAL)
jack on a portable MD

recorder.

2 Turn on the power.
3 Start recording on the
component
connected.
4 Start playing a CD on
this player.
When recording a radio
program or tape, tune
in a station or play the
tape after step 3 above.
(If noise is heard while
recording a radio
program on an MD,
keep the portable MD
recorder as far away as
possible from this
player and reorient the
portable MD recorder.)
44 EN
Setting Up
Recording a CD on a portable MD recorder
You can record the whole CD on an MD using a
specific button on the player.
DUB START
CD m MD
DC OUT
MD CONTROL
(6V 800mA MAX)
1 Place a CD on the player.
2 Press CONTROL MD m CD so that you can operate
the CD section on the player.
3 Insert a blank MD into the MD recorder, and locate
the point you want to start recording. For details,
refer to the instruction manual of the portable MD
recorder.
4 Set the SYNCHRO REC switch on the portable MD
recorder to "ON".
5 Check the indications appearing in the display on the
MD recorder, then press DUB START CD m MD.
Recording starts.
To stop recording
Press p on the CD section.
CONTROL
MD m CD
OPTICAL
LINE IN LINE OUT
DIGITAL OUT(CD)
MZ-R30/R50
MD Link