Program Play - Sony ZS-D7 Operating Instructions Manual

Creating your own program (Program Play) (continued)
Tips
• If the program play is
finished, the program is
saved. You can play the
same program again by
pressing (.
• If you open the CD
tray, the program is
erased.
• You can record your
own program.
Press DUB START CD
m TAPE after step 5 of
the programming
procedure.
20 EN
The CD Player
To cancel Program Play
Press MODE on the remote until "PROGRAM"
disappears from the display.
To check the order of tracks before play
As you turn the jog dial in stop mode, the track
number appears in the programmed order.
To change the current program
Change before starting the program play.
To
Erase the last track in
the program
Change the whole
program completely
Do this
1 Press CANCEL.
Every time you press the
button, the last track in the
program is cleared.
2 Re-enter the track numbers
by turning the jog dial and
pressing ENTER.
1 Press p to erase the whole
program.
2 Create a new program
following the programming
procedure.