Wiring - Honeywell RIO Manual

!
CAUTION
Be sure outlet box is properly grounded or that a
ground (green or bare) wire is present.
!
WARNING
If house wires are different colors than referred to in
the following step, stop immediately. A professional
electrician is recommended to determine wiring.
Incorrect wire connection can damage the receiver
and could cause fire or injury.
17. Connect supply, receiver, and fan wires according
to the diagram (Fig. 17) and these steps:
• Connect the Green wires from the fan and
mounting bracket to the Bare/Green (ground)
supply wire.
• Connect the Blue wire from the receiver to the Blue
fan wire.
• Connect the Black wire from the receiver to the
Black fan wire.
• Connect the Red wire from the receiver to the
Black (hot/power) supply wire.
• Connect the White wire with the red label from the
receiver to the White (neutral) supply wire.
• Connect the White wire with the white label from
the receiver to the White fan wire.
Secure all wiring connections together with wire
connectors and push all connected wires back into
the outlet box.
Wire Connector
Important: The black fan wire is power for fan. The blue
fan wire is power for the light. The white wire from
the fan is common/neutral. The green wires from the
fan and mounting bracket are ground wires.
!
a
!

WIRING

Fig. 17
White
Receiver
11
Black (hot/power)
White (neutral)
Bare/Green (ground)